TP-Link T2600G-28TS - Show Spanning-Tree Mst

279
34.27 show spanning-tree mst
Description
The show spanning-tree mst command is used to display the related
information of MST Instance.
Syntax
show spanning-tree mst { configuration [ digest ] | instance instance-id
[ interface [ gigabitEthernet port | port-channel port-channel-id ] ] }
Parameter
instance-id —— Instance ID desired to show, ranging from 1 to 8.
port —— The Ethernet port number.
port-channel-id —— The ID of the port channel.
Command Mode
Privileged EXEC Mode and Any Configuration Mode
Privilege Requirement
None.
Example
Display the region information and mapping information of VLAN and MST
Instance:
T2600G-28TS(config)#show spanning-tree mst configuration
Display the related information of MST Instance 1:
T2600G-28TS(config)#show spanning-tree mst instance 1
Display all the ports information of MST Instance 1:
T2600G-28TS(config)#show spanning-tree mst instance 1 interface