TP-Link T2600G-28TS - Show Ip Route Summary; Show Ipv6 Interface

386
Command Mode
Privileged EXEC Mode and Any Configuration Mode
Privilege Requirement
None.
Example
Display the shortest route to 192.168.0.100:
T2600G-28TS(config)# show ip route specify 192.168.0.100
Look up the route entry with the destination as 192.168.0.0/24:
T2600G-28TS(config)# show ip route specify 192.168.0.0 255.255.255.0
Display the routes to all the subnets that belongs to 192.168.0.0/16:
T2600G-28TS(config)# show ip route specify 192.168.0.0 255.255.0.0
longer-prefixes
42.16 show ip route summary
Description
This show ip route summary command is used to display the summary
information of the route entries classified by their sources.
Syntax
show ip route summary
Command Mode
Privileged EXEC Mode and Any Configuration Mode
Privilege Requirement
None.
Example
Display the summary information of route entries:
T2600G-28TS(config)# show ip route summary
42.17 show ipv6 interface
Description
This command is used to display the configured IPv6 information of the
management interface, including ipv6 function status, link-local address and
global address, IPv6 multicast groups etc.