TP-Link T2600G-28TS - Show Snmp-Server Engineid; Show Rmon History

358
Example
Display the Host table:
T2600G-28TS# show snmp-server host
39.22 show snmp-server engineID
Description
The show snmp-server engineID command is used to display the engineID of
the SNMP.
Syntax
show snmp-server engineID
Command Mode
Privileged EXEC Mode and Any Configuration Mode
Privilege Requirement
Only Admin level users have access to these commands.
Example
Display the engineID:
T2600G-28TS# show snmp-server engineID
39.23 show rmon history
Description
The show rmon history command is used to display the configuration of the
history sample entry.
Syntax
show rmon history [ index ]
Parameter
index —— The index number of the entry selected to display the configuration,
ranging from 1 to 12, in the format of 1-3, 5. You can select more than one entry
for each command. By default, the configuration of all history sample entries is
displayed.
Command Mode
Privileged EXEC Mode and Any Configuration Mode