339
Privilege Requirement
None.
Example
Display all Querier information:
T2600G-28TS(config)# show ipv6 mld snooping querier
38.30 show ipv6 mld profile
Description
The show ipv6 mld profile command is used to display the configuration
information of all the profiles or a specific profile.
Syntax
show ipv6 mld profile [ id ]
Parameter
id —— Specify the ID of the profile, ranging from 1 to 999.
Command Mode
Privileged EXEC Mode and Any Configuration Mode
Privilege Requirement
None.
Example
Display the configuration information of all profiles:
T2600G-28TS(config)# show ipv6 mld profile
To Next Page
Loading...
