26
Privilege Requirement
None.
Example
Show the commands you have entered in the current mode:
T2600G-28TS (config)# history
1 history
2.9 history clear
Description
The history clear command is used to clear the commands you have entered in
the current mode, therefore these commands will not be shown next time you
use the history command.
Syntax
history clear
Command Mode
Privileged EXEC Mode and any Configuration Mode
Privilege Requirement
Only Admin, Operator and Power User level users have access to these
commands.
Example
Clear the commands you have entered in the current mode:
T2600G-28TS(config)#history clear
To Next Page
Loading...
