TP-Link T2600G-28TS - 8.6 DLDP

121
Display the DHCPv6 Snooping configuration of Gigabit Ethernet port 1/0/5:
T2600G-28TS#show ipv6 dhcp snooping interface gigabitEthernet 1/0/5
16.11 show ipv6 nd snooping
Description
The show ipv6 nd snooping command is used to display the running status of
ND Snooping.
Syntax
show ipv6 nd snooping
Command Mode
Privileged EXEC Mode and Any Configuration Mode
Privilege Requirement
None.
Example
Display the running status of ND Snooping:
T2600G-28TS#show ipv6 nd snooping
16.12 show ipv6 nd snooping interface
Description
The show ipv6 nd snooping interface command is used to display the ND
Snooping configuration of a desired Gigabit Ethernet port/port channel or of all
Ethernet ports/port channels.
Syntax
show ipv6 nd snooping interface [ gigabitEthernet port | port-channel
port-channel-id ]
Parameters
port —— The Ethernet port number.
port-channel-id —— The ID of the port channel.
Command Mode
Privileged EXEC Mode and Any Configuration Mode