TP-Link T2600G-28TS - Show Ip Dhcp Server Extend-Option; Show Ip Dhcp Server Pool; Show Ip Dhcp Server Excluded-Address

422
45.21 show ip dhcp server extend-option
Description
The show ip dhcp server extend-option command is used to display the
configuration of the remote DCHP servers.
Syntax
show ip dhcp server extend-option
Command Mode
Privileged EXEC Mode and Any Configuration Mode
Privilege Requirement
None.
Example
Display the configurations of the remote DCHP servers:
T2600G-28TS(config)# show ip dhcp server extend-option
45.22 show ip dhcp server pool
Description
The show ip dhcp server pool command is used to display the configuration of
the address pool.
Syntax
show ip dhcp server pool
Command Mode
Privileged EXEC Mode and Any Configuration Mode
Privilege Requirement
None.
Example
Display the configured address pool:
T2600G-28TS(config)# show ip dhcp server pool
45.23 show ip dhcp server excluded-address
Description
The show ip dhcp server excluded-address command is used to display the
configuration of reserved addresses.