TP-Link T2600G-28TS - Domain-Name; Bootfile

420
45.17 domain-name
Description
The domain-name command is used to specify the domain name for the DHCP
client. To delete the domain name, please use no domain-name command.
Syntax
domain-name domainname
no domain-name
Parameter
domainname —— Specify the domain name for the DHCP client.
Command Mode
DHCP Configuration Mode
Privilege Requirement
Only Admin, Operator and Power User level users have access to these
commands.
Example
Specify the DHCP client’s domain name as edu:
T2600G-28TS(config)# ip dhcp server pool product
T2600G-28TS(config-dhcp)# domain-name edu
45.18 bootfile
Description
The bootfilecommand is used to specify the name of the DHCP client’s bootfile.
To delete the bootfile, please use no bootfile command.
Syntax
bootfile file-name
no bootfile
Parameter
file-name —— Specify the name of the DHCP client’s bootfile.
Command Mode
DHCP Configuration Mode
Privilege Requirement
Only Admin, Operator and Power User level users have access to these
commands.