TP-Link T2600G-28TS - Show Ip Dhcp Server Manual-Binding; Show Ip Dhcp Server Binding

423
Syntax
show ip dhcp server excluded-address
Command Mode
Privileged EXEC Mode and Any Configuration Mode
Privilege Requirement
None.
Example
Display the configured reserved addresses:
T2600G-28TS(config)# show ip dhcp server excluded-address
45.24 show ip dhcp server manual-binding
Description
The show ip dhcp server manual-binding command is used to display the
configuration of static binding address.
Syntax
show ip dhcp server manual-binding
Command Mode
Privileged EXEC Mode and Any Configuration Mode
Privilege Requirement
None.
Example
Display the configured static binding address:
T2600G-28TS(config)# show ip dhcp server manual-binding
45.25 show ip dhcp server binding
Description
The show ip dhcp server binding command is used to display the binding
entries.
Syntax
show ip dhcp server binding [ ip ip-address ]
Parameter
ip-address —— Specify the binding IP address.