TP-Link T2600G-28TS - Ip Dhcp Server Extend-Option Vendor-Class-ID

411
Parameter
ip-address —— Specify the IP address of the remote server.
Command Mode
Global Configuration Mode
Privilege Requirement
Only Admin, Operator and Power User level users have access to these
commands.
Example
Set the remote DHCP server’s IP address as 192.168.3.1:
T2600G-28TS(config)# ip dhcp server extend-option capwap-ac-ip
192.168.3.1
45.3 ip dhcp server extend-option vendor-class-id
Description
The ip dhcp server extend-option vendor-class-id command is used to
configure the class ID of the packets from DHCP server in a different network
segment. To delete the class ID settings, please use no ip dhcp server
extend-option vendor-class-id command.
Syntax
ip dhcp server extend-option vendor-class-id class-id
no ip dhcp server extend-option vendor-class-id
Parameter
class-id —— Specify the class ID of the DHCP packets from another network
segment.
Command Mode
Global Configuration Mode
Privilege Requirement
Only Admin, Operator and Power User level users have access to these
commands.
Example
Set the class ID of the DHCP packets from another network segment as 34:
T2600G-28TS(config)# ip dhcp server extend-option vendor-class-id 34