TP-Link T2600G-28TS - Chapter 7 Private VLAN Commands; Private-Vlan Primary; Private-Vlan Community

47
Chapter 7 Private VLAN Commands
Private VLANs are configured specially for saving VLAN resource of uplink devices and decreasing
broadcast.
7.1 private-vlan primary
Description
The private-vlan primary command is used to configure the designated VLAN
as the primary VLAN of the Private VLAN. To remove the primary VLAN
property pf the current VLAN, please use no private-vlan primary command.
Syntax
private-vlan primary
no private-vlan primary
Command Mode
VLAN Configuration Mode (VLAN)
Privilege Requirement
Only Admin and Operator level users have access to these commands.
Example
Configure the VLAN 3 as the primary VLAN of the private VLAN:
T2600G-28TS(config)#vlan 3
T2600G-28TS(config-vlan)#private-vlan primary
7.2 private-vlan community
Description
The private-vlan community command is used to configure the designated
VLAN as the community VLAN of the Private VLAN. To remove the community
VLAN property pf the current VLAN, please use no private-vlan community
command.
Syntax
private-vlan community