64
Syntax
voice vlan aging time
no voice vlan aging
Parameter
time —— Aging time (in minutes) to be set for the Voice VLAN. It ranges from 1
to 43200 minutes and the default value is 1440 minutes.
Command Mode
Global Configuration Mode
Privilege Requirement
Only Admin, Operator and Power User level users have access to these
commands.
Example
Set the aging time for the Voice VLAN as 1 minute:
T2600G-28TS(config)# voice vlan aging 1
10.3 voice vlan priority
Description
The voice vlan priority command is used to configure the priority for the Voice
VLAN. To restore to the default priority, please use no voice vlan priority
command.
Syntax
voice vlan priority pri
no voice vlan priority
Parameter
pri —— Priority, ranging from 0 to 7, and the default value is 6.
Command Mode
Global Configuration Mode
Privilege Requirement
Only Admin, Operator and Power User level users have access to these
commands.
To Next Page
Loading...
