17-3
IM DLM4038-02EN
Assigning File Names (File Name)
Press the File Name soft key to display the following menu.
Set the file name.
Set auto naming.
Setting Auto Naming (Auto Naming)
OFF: Disables the auto naming feature. The name that you specify using the File Name
setting is used. If a file with the same name exists in the save destination folder, an
overwrite confirmation dialog box is displayed.
Numbering: The DLM4000 automatically adds a three-digit number from 000 to 999 after the
common name specified using the File Name setting and saves files.
Date: The DLM4000 uses an 8-character file name that is produced based on the date and
time using base-36 numbers (0 to 9 and A to Z). The file name specified for the File
Name setting is ignored.
Time in units of 100 ms
0 ms = 0000, 100 ms = 0001, ..., 59 min 59 s 900 ms = ORRZ
Hour 0 = 0, ..., hour 9 = 9, hour 10 = A, ..., hour 23 = N
1st = 1, ..., 10th = A, ..., 31st = V
Jan. = 1, ..., Oct. = A, Nov. = B, Dec. = C
2000 = 0, ..., 2010 = A, ..., 2035 = Z
Date2: The file name is the date and time (down to ms) when the file is saved. The file name
specified for the File Name setting is ignored.
Month
Day
Minute
Second
Millisecond
20121130_121530_100 (2012/11/30 12:15:30.100)
Assigning File Names (File Name)
You can set the file name that is used when the auto naming feature is turned off or the common file
name that is used when the auto naming feature is set to Numbering.
Setting a Comment (Comment)
You can add a comment that consists of up to 128 characters when you save a file. You do not have
to enter a comment. All characters, including spaces, can be used in comments.
Data Type Setting (Data Type)
Binary: Data is saved in binary format (the extension is .wdf).
ASCII: Data is saved in ASCII format (the extension is .csv).
ASCII with TimeInfo.: All data is saved in ASCII format with time information (the extension is .csv).
17.2 Saving Waveform Data
To Next Page
Loading...
Need help?
General
