16-5
IM DLM4038-02EN
16.4 Saving Screen Captures to Files
This section explains the following settings (which are used when saving screen captures to files).
• Output destination
• Save mode
• Data format
• Color data
• Background transparency (transparent or opaque)
• Save destination
• File name
► “Saving Screen Captures to Files (File)” in the Features Guide
PRINT File Menu
Press SHIFT+PRINT (MENU), the Print to soft key, and then the File soft key to display the following
menu.
Set the print destination to File.
Set the save mode (Hardcopy, Normal, Wide).
Set the data format to PNG.
Set the color data (OFF, ON, ON(Rev.), ON(Gray)).
Set the file name.
Sets the background to
transparent (Transparent)
or opaque (Normal).
Sets the inclusion of
setting information
(Information) on and off.*
* This can be set when the print destination is set to File and the save mode is set to Hardcopy or Normal.
Set the data format
to BMP or JPEG.
Set the save
destination.
Setting the Save Mode (Mode)
Hardcopy: The entire DLM4000 screen is saved.
Normal: The waveform area of the DLM4000 screen is saved. The menu is not saved.
Wide: As in Normal mode, the entire DLM4000 screen is saved, but the time axis is magnified
from 2 to 10 times.
Including Setting Information (Information)
When save mode is set to hardcopy (Hardcopy) or normal (Normal), channels, triggers, waveform
acquisition, and other setting information can be included in waveform screen captures.
OFF: Setting information is not included.
ON: Setting information is included.
Setting the Save Destination (File List)
Specify the drive or folder to save files to in the same way as for the file feature. For details, see
section 17.2.
To Next Page
Loading...
