YOKOGAWA DLM4000 Series - Printing and Saving Screen Capture Data to Multiple Output Destinations at the same Time

16-7
IM DLM4038-02EN
16.5 Printing and Saving Screen Capture Data to
Multiple Output Destinations at the Same Time
This section explains the following settings (which are used when printing and saving screen capture
data and waveform data to multiple output destinations at the same time).
• Output destination
• Saving screen captures to files
• Printing screen captures on the built-in printer (option)
• Printing screen captures on a network printer (option)
• Saving waveform data
► “Printing and Saving Screen Captures to Multiple Destinations (Multi)” in the Features Guide
PRINT Multi Menu
Press SHIFT+PRINT (MENU), the Print to soft key, and then the Multi soft key to display the following
menu.
Set the output destination to Multi.
Set whether to save to a file (OFF, ON).
Set whether to print on the built-in printer (OFF, ON).
*
Set whether to print on the network printer (OFF, ON).
*
Set whether to save waveform data (OFF, ON).
* Option
The DLM4000 outputs screen capture data and waveform data according to the PRINT menu or FILE
menu settings. For details on those settings, see the following sections.
• Saving screen captures to files
►section16.4
• Printing screen captures on the built-in printer (option)
►section16.2
• Printing screen captures on a network printer (option)
►section16.3
• Saving waveform data
►section17.2
Note
When you are executing action-on-trigger or GO/NO-GO determination, if Print to is set to Multi, you cannot
print or save screen captures.