YOKOGAWA DLM4000 Series User Manual

18-7
IM DLM4038-02EN
18.5 Configuring Mail Transmission (SMTP Client
Function)
This section explains the following settings (which are used when transmitting mail to a specified mail
address on a network).
• Mail server
• Mail address
• Comments
• Attaching image files
• Timeout
• User authentication
• Sending a test mail
► “Mail (Mail)” in the Features Guide
UTILITY Network Menu
Press UTILITY and then press the Network soft key to display the following menu.
Configure mail settings.
Configuring Mail (Mail)
Press the Mail soft key to display the following screen.
Set the mail server.
IP address or host name and domain name
(When DNS is enabled)
Set the recipient email address.
Specify comments.
Set whether to attach an image file or not (OFF, ON).
Sends a test mail
Set the timeout value (1 to 60 s).
Turns user authentication on and off
• Set the encryption type (U/P, APOP).
• Set the name of the POP3 server.
• Set the password.
• Set the user name.
Set these when POP3 before SMTP is turned on.

YOKOGAWA DLM4000 Series Specifications

General

Brand	YOKOGAWA
Model	DLM4000 Series
Category	Test Equipment
Language	English