YOKOGAWA DLM4000 Series User Manual

18-5
IM DLM4038-02EN
18.4 Monitoring the DLM4000 Display from a PC
(Web Server)
This section explains the following settings (which are used when connecting to the DLM4000 from
a PC over a network to show the DLM4000’s display on the PC and to start and stop waveform
acquisition from the PC).
• User name
• Password
• Timeout
• Connecting to the DLM4000 from a PC
► “Web Server (FTP/Web Server)” in the Features Guide
UTILITY Network Menu
Press UTILITY and then press the Network soft key to display the following menu.
Configure the FTP/Web server settings.
Configuring the Web Server (FTP/Web Server)
Press the FTP/Web Server soft key to display the following screen.
Confirms the settings
• Enter the user name using up to 30 characters.
• Enter the password using up to 15 characters.
• Turns the FTP server ON and OFF
• Turns the Web server ON and OFF
• Set the timeout value (0 to 3600 s).
Settings for accessing the DLM4000 from a PC

YOKOGAWA DLM4000 Series Specifications

General

Brand	YOKOGAWA
Model	DLM4000 Series
Category	Test Equipment
Language	English