YOKOGAWA DLM4000 Series - Using SNTP to Set the Date and Time

18-10
IM DLM4038-02EN
18.8 Using SNTP to Set the Date and Time
This section explains how to use SNTP to set the date and time of the DLM4000.
• SNTP server
• Timeout
• Executing time adjustment
• Automatic adjustment
► “SNTP (SNTP)” in the Features Guide
UTILITY Network Menu
Press UTILITY and then press the Network soft key to display the following menu.
Configure the SNTP settings.
SNTP Settings (SNTP)
Press the SNTP soft key to display the following screen.
Turns automatic adjustment on and off
Executes time adjustment
Set the timeout value (1 to 60 s).
Set the SNTP server.
IP address or host name and domain name
(When DNS is enabled)