YOKOGAWA DLM4000 Series - Chapter 19 Other Operations; Turning the Click Sound on and off and Changing the Menu Language, Message Language, and USB Keyboard Language

19-1
IM DLM4038-02EN
Chapter 19 Other Operations
19.1 Turning the Click Sound On and Off and
Changing the Menu Language, Message
Language, and USB Keyboard Language
This section explains the settings that you can use to turn the click sound on and off and change the
menu language, message language, and USB keyboard language.
► “System Configuration (System Configuration)” in the Features Guide
UTILITY System Configuration Menu
Press UTILITY and then press the System Configuration soft key to display the following menu.
Select the USB keyboard language.
Configure the language settings.
Turns the click sound on and off
Adjust the backlight. ► section 4.4
Configure storage management settings. ► section 20.5
Configure the USB communication device settings. ► section 19.2
Set the date and time.
► Section 3.4 of the Getting Started Guide, IM DLM4038-03EN
Setting the Language (Language)
Press the Language soft key to display the following menu.
Set the menu language
(Japanese, English, Chinese, Korean, Italian, French, German, Spanish, Russian).
Set the message language
(Japanese, English, Chinese, Korean, Italian, French, German, Spanish, Russian).
Note
Some terminology is always displayed in English.
Setting the USB Keyboard Language (USBKeyBoard)
You can use the following keyboards that conform to USB Human Interface Devices (HID) Class Ver. 1.1.
ENG: 104-key keyboards
JPN: 109-key keyboards
For details on how DLM4000 keys are mapped to the keys on a USB keyboard, see appendix 2 in the
Getting Started Guide, IM DLM4038-03EN.