YOKOGAWA DLM4000 Series - Printing on a Network Printer (Option)

16-4
IM DLM4038-02EN
16.3 Printing on a Network Printer (Option)
This section explains the following settings (which are used when printing on a network printer).
• Print destination
• Print mode
• Printer type
• Color
• Comments
► “Printing on a Network Printer (Network)” in the Features Guide
PRINT Network Menu
Press SHIFT+PRINT (MENU), the Print to soft key, and then the Network soft key to display the
following menu.
Set the print destination to Network.
Set the print mode.
Set the printer type (HP Inkjet, HP Laser, EPSON Inkjet).
Turns color printing on and off
Specify comments.
Setting the Print Mode (Mode)
Hardcopy: The entire DLM4000 screen is printed.
Normal: The waveform area of the DLM4000 screen is printed. The menu is not printed.
Note
You must configure the network printer in advance by following the instructions in section 18.7.