18-3
IM DLM4038-02EN
18.2 Configuring TCP/IP Settings
This section explains the following TCP/IP settings (which are used when connecting to a network).
• DHCP (IP address, subnet mask, and default gateway)
• DNS (domain name, DNS server IP address, and domain suffix)
► “TCP/IP (TCP/IP)” in the Features Guide
UTILITY Network Menu
Press UTILITY and then press the Network soft key to display the following menu.
Configure TCP/IP settings.
TCP/IP Settings (TCP/IP)
Press the TCP/IP soft key to display the following screen.
Turns DHCP on and off
• IP address
• Subnet mask
• Default gateway
Set these when DHCP is turned off.
Set the DNS (OFF, ON, Auto).
*
• Set the domain name.
• Set the DNS server IP addresses
(primary, secondary).
• Set the domain suffixes
(primary, secondary).
Confirms the settings
These are displayed when DNS is set to ON or Auto.
* Auto is displayed when DHCP is turned on.
DNS Settings (DNS)
OFF: Disable the DNS.
ON: Enable the DNS. Set the domain name, the DNS server IP address, and the domain suffix.
Auto: Enable the DNS. After you set the domain suffix, the domain name and the DNS server IP
address are set automatically. This option can only be selected when DHCP is on.
To Next Page
Loading...
Need help?
General
