1-3
IM DL950-02EN
1.2 Initializing the Settings
This section explains how to initialize the settings to their factory default values.
Items Common to Scope Mode and Recorder Mode
Initializing Settings
► “Initializing Settings to Default (Initialize)” in the Features Guide
SETUP Screen
1.
On the waveform screen’s MENU, tap SETUP > SETUP, or press SETUP.
Initializes the settings
2.
Tap Initialize, or press the soft key. A confirmation message appears.
3.
Tap OK, or select OK using the arrow keys, and press SET. Initialization is executed.
Settings That Cannot Be Reset to Their Factory Default Values
• Date and time settings
• Communication settings
• Language settings
• Operation mode
• Network settings
• Startup state (Standby Startup, Immediate Startup)
To Next Page
Loading...
