8-8
IM DL950-02EN
8.4 Searching for a Specific Date and Time
This section explains the following settings for searching for a specific date and time:
Items Common to Scope Mode and Recorder Mode
• Search type
• Date and time
► “Time Search (Time)” in the Features Guide
SEARCH Time menu
1.
On the waveform screen’s MENU, tap ANALYSIS > SEARCH, or press SHIFT+ZOOM
(SEARCH).
2.
Set Type to Time.
See “Executing a Search.”
Set the search type to Time.
See “Setting Search Conditions.”
Configure the search result display window
(zoom window) ► sec. 8.1
Setting Search Conditions (Setup)
3.
Tap Setup, or press the soft key. The following screen appears.
Set the date and time.
Executing a Search (Execute)
4.
Tap Execute, or press the soft key. The instrument executes the search.
To Next Page
Loading...
