5-4
IM DL950-02EN
5.3 Setting the Grid and Interpolation Method
This section explains the waveform information and preference settings for displaying waveforms.
Items Common to Scope Mode and Recorder Mode
• Grid
• Interpolation method
► “Grid (Graticule)” and “Interpolation Method (Dot Connect)” in the Features Guide
Display Menu
1.
On the waveform screen’s MENU tap DISPLAY > DISPLAY, or press DISPLAY. The Display
menu appears.
See “Setting the Grid.”
Set the interpolation method (OFF(2k), OFF(100k),
Sine, Line, Pulse).
Set the display format. ► sec. 5.1
Select the display group you want to edit. ►
sec. 5.1
Detail setup ► sec. 5.4
Set the waveform arrangement, color, and grouping.
► sec. 5.2
Turns accumulation on or off (Scope mode only)
► sec. 5.5
Setting the Grid (Graticule)
2.
Tap Graticule, or tap the soft key. The following window appears.
Set the grid type.
Turns the detailed grid display on or off
Set the grid intensity (1 to 8).
To Next Page
Loading...
