23-4
IM DL950-02EN
23.2 Calibrating the Instrument
This section explains how to calibrate the instrument. Execute calibration when you want to make
accurate measurements.
Items Common to Scope Mode and Recorder Mode
• Executes calibration
► “Calibration (CAL)” and “Power Integration Calibration (/G05 option)”
in the Features Guide
CAL Menu
1.
On the waveform screen’s MENU, tap SETUP > CAL, or press SHIFT+SETUP (CAL). The
following screen appears.
Executes calibration
Executes power integration
calibration
/G5 option only
Turns auto calibration on or off
Resetting All Settings to Their Factory Default Values
See section 4.6 in the DL950 Getting Started Guide (IM DL950E-03EN).
To Next Page
Loading...
