YOKOGAWA ScopeCorder DL950 User Manual

20-11
IM DL950-02EN
20.7 Using SNTP to Set the Date and Time
This section explains how to use SNTP to set the Instrument’s date and time.
Items Common to Scope Mode and Recorder Mode
• SNTP server
• Timeout
• Executes clock adjustment
• Automatic adjustment
► “SNTP (SNTP)” in the Features Guide
UTILITY Network Menu
1.
On the waveform screen’s MENU, tap OTHERS > UTILITY, or press UTILITY.
2.
Tap Network, or press the soft key. The following screen appears.
Select Network.
Configure the FTP server. ► sec. 20.3
Configure the Web server. ► sec. 20.4
Configure the TCP/IP settings
► sec. 20.2
Configure mail settings. ► sec. 20.6
Configure network printing. ► sec. 20.8
Configure the network drive. ► sec. 20.5
See “Configuring the SNTP settings.”
Configure the TCP/IP settings
► sec. 20.2 (/C60 option)
Configuring the SNTP Settings (SNTP)
3.
Tap SNTP, or press the soft key. The following screen appears.
Set the timeout value (1 to 60 s).
Set the SNTP server (IP address, or when DNS
is enabled, the host name and domain name).
Turns automatic adjustment on or off
Executes clock adjustment
Selects 1G or 10G (displayed for the /C60 option)

YOKOGAWA ScopeCorder DL950 Specifications

General

Brand	YOKOGAWA
Model	ScopeCorder DL950
Category	Test Equipment
Language	English