19-20
IM DL950-02EN
19.8 Loading Setup Data
This section explains the following settings for loading setup data:
Items Common to Scope Mode and Recorder Mode
• Displaying file information
• Loading setup data
► “Loading Setup Data (Setup)” in the Features Guide
FILE Setup (Load) Menu
1.
On the waveform screen’s MENU, tap FILE > FILE, or press FILE.
2.
Tap Setup under Load, or press the soft key. The following screen appears.
Select the .SET file that you want to load.
Displays file information
Starts loading
Selecting a File
Select the file to load from the file list. For details on file operations, see section 19.10.
Loading Setup Data (Load)
• Select the setup data and load it. The extension is .SET.
• If the module configuration when the setup data is saved and that when the data is loaded are
different, only the setup data of modules that match is loaded. When loading is complete, a
message indicating the channel numbers that were not loaded is displayed.
To Next Page
Loading...
