13-4
IM DL950-02EN
13.2 Setting the Math Waveform Scaling
This section explains the following settings for displaying computed waveforms:
Items Common to Scope Mode and Recorder Mode
• Vertical scale
► “Scaling Mode (Scaling)” in the Features Guide
Math Menu
1.
On the waveform screen’s MENU, tap ANALYSIS > MATH, or press SHIFT+FFT (MATH). The
Math menu appears.
Set the math mode to ON.
Set the expression. ► sec. 13.1
Set the math waveform to set scaling (1 to 8).
Set the scaling mode (Auto, Manual).
Set averaging. ► sec. 13.3
(For user-defined math function, /G02 option)
Set the upper and lower limits.
(When the linear scaling mode is Manual)
Set the math range. ► sec. 13.1
To Next Page
Loading...
