23-5
IM DL950-02EN
23.3 Changing the Message, Menu, and USB
Keyboard Languages
This section explains the following settings:
Items Common to Scope Mode and Recorder Mode
• Message language
• Menu language
• USB keyboard language
► “System Configuration (System Config)” in the Features Guide
UTILITY System Config Menu
1.
On the waveform screen’s MENU, tap OTHERS > UTILITY, or press UTILITY.
2.
Tap System Config, or press the soft key. The following screen appears.
Select System
Config.
Configured the time synchronization.
► chapter 21
Set the date and time.
► Getting Started Guide
Set the LCD.
► sec. 23.4
Update the firmware and add options.
► Manual for updating and adding
options
See “Setting the Language.”
Format the storage device.
► sec. 19.3
Setting the Language (Language)
3.
Tap Language, or press the soft key. The following screen appears.
Set the USB keyboard language (Japanese, English).
Set the message language (Japanese, English, Chinese,
Korean, Italian, French, German, Spanish, Russian).
Set the menu language (Japanese, English, Chinese,
Korean, Italian, French, German, Spanish, Russian).
Note
Some terminology is always displayed in English.
Setting the USB Keyboard Language (USB Keyboard)
You can use the following keyboards that conform to USB Human Interface Devices (HID)
Class Ver. 1.1.
English: 104-key keyboards
Japanese: 109-key keyboards
For details on how the keys of this instrument are mapped to the keys on a USB keyboard, see
appendix 10 in the Getting Started Guide (IM DL950E-03EN).
To Next Page
Loading...
Need help?
General
