20-10
IM DL950-02EN
20.6 Configuring Mail Transmission (SMTP client
function)
This section explains the following settings for transmitting mail to a specified mail address on a
network:
Items Common to Scope Mode and Recorder Mode
• Mail server
• Recipient mail address
• Comment
• Attaching image files
• Timeout
• Sending a test mail
► “Mail (Mail)” in the Features Guide
UTILITY Network Menu
1.
On the waveform screen’s MENU, tap OTHERS > UTILITY, or press UTILITY.
2.
Tap Network, or press the soft key. The following screen appears.
Select Network.
Configure the FTP server. ► sec. 20.3
Configure the Web server. ► sec. 20.4
Configure the TCP/IP settings
► sec. 20.2
See “Configuring Mail.”
Configure network printing. ► sec. 20.8
Configure the network drive. ► sec. 20.5
Set the SNTP. ► sec. 20.7
Configure the TCP/IP settings
► sec. 20.2 (/C60 option)
Configuring Mail (Mail)
3.
Tap Mail, or press the soft key. The following screen appears.
Set the recipient mail address.
Set comments.
Set the timeout value (1 to 60 s).
Sends a test mail
Set the mail server (IP address, or when DNS is
enabled, the host name and domain name).
Turns image data attachment on or off
Selects 1G or 10G (displayed for the /C60 option)
To Next Page
Loading...
