YOKOGAWA ScopeCorder DL950 - Setting Conditions for Waveform Acquisition (Recorder mode)

3-4
IM DL950-02EN
3.2 Setting Conditions for Waveform Acquisition
(Recorder mode)
This section explains the following settings for acquiring waveforms in Recorder mode:
Applicable in Recorder Mode
• Recording time
• Sample interval
• Acquisition method
• Acquisition mode
• Time base
► “Waveform Acquisition” in the Features Guide
ACQUIRE menu
1.
On the waveform screen’s MENU, tap ACQUIRE > ACQUIRE, or press ACQUIRE. The
ACQUIRE menu appears.
See “Basic Setup.”
See “Detail Setup.”