YOKOGAWA ScopeCorder DL950 - Configuring with the Application Menu

1-5
IM DL950-02EN
1.4 Configuring with the Application Menu
This section explains how to easily configure the instrument using the measurement applications
registered in advance.
Items Common to Scope Mode and Recorder Mode
Configuration on the Application Menu
► “Application (APPLICATION)” in the Features Guide
APPLICATION Menu
1.
On the waveform screen’s MENU, tap APPLICATION, or press APPLICATION.
Favorites display area
Register in favorites.
Applications
registered in advance
Editing Favorites
2.
Tap Edit Favorites, or select Edit Favorites using the jog dial or arrow keys, and press SET.
The favorites display area becomes editable.
Tap the location where
you want to register at.
Finishes the registration
Registered application
3.
Tap a location to register an application to, or select it using the jog dial or arrow keys, and
press SET. A list of applications appears.
To change an application that is already registered, tap the location where the application is
registered, or select it using the jog dial or arrow keys, and press SET.
4.
Tap the application you want to register, or select it using the jog dial or arrow keys, and press
SET. The application is registered in favorites.