1-6
IM DL950-02EN
5.
Tap
Back
, or select
Back
using the jog dial or arrow keys, and press SET.
The screen shown in step 1 appears.
Example in which
harmonic analysis and
angle-of-rotation
calculation applications
are registered
How to Use Applications
This section explains how to use typical applications.
2.
On the application list or favorites, tap the application you want to edit, or select it using the
jog dial or arrow keys, and press SET. An application setup screen appears.
Setup steps
Set from left to right.
You can also tap a
step you want to set
directly.
Setup menu
Finishes the setup
Advances to the next step
Note
Depending on the setup conditions, setup steps that do not need to be configured appear dark and are
skipped. Even if you tap a setup step that appears dark, a setup screen will not appear.
1.4 Configuring with the Application Menu
To Next Page
Loading...
