1-4
IM DL950-02EN
1.3 Performing Auto Setup
This section explains how to perform auto setup, which automatically sets the instrument’s settings
to the values that are most suitable for the input signals.
Items Common to Scope Mode and Recorder Mode
Executing Auto Setup
► “Auto Setup (Auto Setup)” in the Features Guide
SETUP Screen
1.
On the waveform screen’s MENU, tap SETUP > SETUP, or press SETUP.
Auto setup
2.
Tap Auto Setup, or press the soft key. A confirmation message appears.
3.
Tap OK, or select OK using the arrow keys, and press SET. Auto setup is executed.
To Next Page
Loading...
Need help?
General
