5-10
IM DL950-02EN
5.6 Using the Snapshot and Clear Trace Features
Items Common to Scope Mode and Recorder Mode
• Taking a snapshot
• Clearing the snapshot waveform
► “Snapshot (SNAPSHOT)” and “Clear Trace (CLEAR TRACE)” in the Features Guide
Snapshot
1.
On the waveform screen’s MENU, tap OTHERS > SNAPSHOT, or press
SNAPSHOT. The
currently displayed waveform is retained on the screen as a snapshot displayed in white.
Snapshot waveforms remain on the screen until you execute a clear trace operation.
Clear Trace
1.
On the waveform screen’s MENU, tap OTHERS > CLEAR TRACE, or press CLEAR TRACE.
All waveforms on the screen are cleared.
To Next Page
Loading...
