YOKOGAWA ScopeCorder DL950 - Saving Waveform Data

19-9
IM DL950-02EN
19.4 Saving Waveform Data
This section explains the following settings for saving waveform data):
There are two methods to save files: using the FILE Waveform (Save) menu or using the SAVE
menu.
Items Common to Scope Mode and Recorder Mode
• Save destination
• File name
• Data format
• Save range
• Waveform to save
• Saving waveform data
► “Saving Waveform Data (Waveform)” in the Features Guide
FILE Waveform (Save) Menu
1.
On the waveform screen’s MENU, tap FILE > FILE, or press FILE.
2.
Tap Waveform under Save, or press the soft key. The following screen appears.
Select
Waveform.
See “Selecting the
Waveform Save
Range.”
See “Setting the
Waveform Save
Conditions.”
Starts saving
See “Selecting the
Data Type.”
See “Assigning File
Names.”
See “Setting the
Save Destination.”
When Dual Capture Mode Is Off
When Dual Capture Mode Is On
See “Selecting the
Waveform Save Range.”
See “Setting the Waveform
Save Conditions.”
Starts saving
See “Selecting the
Data Type.”
See “Assigning File
Names.”
See “Setting the Save
Destination.”
See “Selecting the
Waveform Save Range.”