5-3
IM DL950-02EN
5.2 Setting the Waveform Arrangement, Color, and
Grouping
This section explains the following settings for displaying waveforms:
Items Common to Scope Mode and Recorder Mode
• Waveform arrangement, color, and grouping
► “Display Group Setup (Display Group Setup))” in the Features Guide
Display Menu
1.
On the waveform screen’s MENU tap DISPLAY > DISPLAY, or press DISPLAY. The Display
menu appears.
See “Setting the Waveform Arrangement, Color,
and Grouping.”
Set the display format. ► sec. 5.1
Select the display group you want to edit.
► sec. 5.1
Set the grid. ► sec. 5.3
Detail setup ► sec. 5.4
Set the interpolation method. ► sec. 5.3
Turns accumulation on or off (Scope mode only) ► sec. 5.5
Setting the Waveform Arrangement, Color, and Grouping (Display
Group Setup)
2.
Tap Display Group Setup, or press the soft key. The following screen appears.
Clears all the settings of
the specified group
Automatically reassigns
just the waveforms whose
displays are turned on
When the mapping method is set to User, set how to map
each channel’s waveform to the divided screens (1 to 16).
Mapping list
Set the mapping mode (Auto, User).
Select the display group.
Group Analysis is for power
analysis and harmonic
groups (/G05 option).
Set the waveforms that you want to map.
Set the display colors.
To Next Page
Loading...
Need help?
General
