23-6
IM DL950-02EN
23.4 Configuring the LCD
This section explains the following settings for adjusting the LCD:
Items Common to Scope Mode and Recorder Mode
• Turning the display on and off
• Setting auto-off
• Setting the LCD brightness
► “System Configuration (System Config)” in the Features Guide
UTILITY System Config Menu
1.
On the waveform screen’s MENU, tap OTHERS > UTILITY, or press UTILITY.
2.
Tap System Config, or press the soft key. The following screen appears.
Configured the time synchronization.
► chapter 21
Set the date and time.
► Getting Started Guide
See “Configuring the LCD.”
Update the firmware and add options.
► Manual for updating and adding
options
Set the language. ► sec. 23.3
Format the storage device.
► sec. 19.3
Select System
Config.
To Next Page
Loading...
