YOKOGAWA ScopeCorder DL950 - Configuring a Network Printer

20-12
IM DL950-02EN
20.8 Configuring a Network Printer
This section explains the following settings for printing screen images to a network printer:
Items Common to Scope Mode and Recorder Mode
• LPR server
• LPR name
• Timeout
► “Network Printer (Net Print)” in the Features Guide
UTILITY Network Menu
1.
On the waveform screen’s MENU, tap OTHERS > UTILITY, or press UTILITY.
2.
Tap Network, or press the soft key. The following screen appears.
Select Network.
Configure the FTP server. ► sec. 20.3
Configure the Web server. ► sec. 20.4
Configure the TCP/IP settings
► sec. 20.2
Configure mail settings.
► sec. 20.6
See “Configuring the Network Printer.”
Configure the network drive. ► sec. 20.5
Configure SNTP. ► sec. 20.7
Configure the TCP/IP settings
► sec. 20.2 (/C60 option)
Configuring the Network Printer (Network Print)
3.
Tap
Network Print
, or press the soft key. The following screen appears.
Set the timeout value (1 to 60 s).
Set the LPR server (IP address, or when DNS is
enabled, the host name and domain name).
Set the LPR name (name of shared printer).