17-8
IM DL950-02EN
17.2 Harmonic Analysis (Harmonics)
This section explains the following settings for performing harmonic analysis:
• Harmonic analysis mode
• Selecting harmonic analysis items
• Harmonic analysis window
► “Power Math (/G05 option)” in the Features Guide
Harmonic Analysis Menu (Harmonic)
1.
On the waveform screen’s MENU, tap ANALYSIS > ANALYSIS, or press SHIFT+HISTORY
(ANALYSIS). The following menu appears.
2.
Tap Harmonic, or press the soft key. A harmonic analysis menu appears.
See “Setting the Harmonic
Analysis Mode.”
Configure harmonic
analysis.
Set the power analysis.
► sec. 17.1
See “Configuring the Harmonic
Analysis Window.”
Set the numeric display.
Display Group: Numeric display of
the waveforms registered in the
display group
Power: Numeric display of power
analysis
Harmonic: Numeric display of
harmonic measurement
Setting the Harmonic Analysis Mode (Analysis Mode)
3.
Tap Analysis Mode, or press the soft key. The following screen appears.
Set the analysis mode.
See “Setting the Harmonic
Analysis Mode.”
Harmonic voltage and
current analysis
Harmonic active power
analysis
Menu when the analysis mode is Line RMS
See “Configuring the Harmonic
Analysis Window.”
To Next Page
Loading...
Need help?
General
