YOKOGAWA ScopeCorder DL950 - Performing User-Defined Math (;G02 option)

13-7
IM DL950-02EN
13.4 Performing User-Defined Math (/G02 option)
This section explains the following settings for user-defined math:
Items Common to Scope Mode and Recorder Mode
• Setting user-defined math functions
► “User-Defined Math Function (User Define)(/G02 option)” in the Features Guide
Math Menu
1.
On the waveform screen’s MENU, tap ANALYSIS > MATH, or press SHIFT+FFT (MATH). The
Math menu appears.
Set the math mode to ON.
See “Setting the Expression.”
Set the math waveform to set scaling. ► sec. 13.2
Set the scaling mode. ► sec. 13.2
Set averaging. ► sec. 13.3
(For user-defined math function, /G02 option)
Set the upper and lower limits. ► sec. 13.2
Set the math range. ► sec. 13.1
Setting the Expression (Setup)
2.
Tap Setup, or press the soft key.
3.
Tap the math number that you want to assign an expression to, or use a jog dial and arrow
keys to select the math number, and press SET. The following screen appears.
Set the operator to User
Define.
Set the expression.
Set the label.
Set the unit.
Math
number