19-17
IM DL950-02EN
19.6 Saving Other Types of Data
This section explains the following settings for saving screen captures, snapshot waveform data,
results of automated measurement of waveform parameters, and results of FFT:
Items Common to Scope Mode and Recorder Mode
• Save destination
• File name
• Saved data
• Data type (screen captures)
• Color data (screen captures)
• Saving data
► “Saving Other Types of Data (Others)” in the Features Guide
FILE Others (Save) Menu
1.
On the waveform screen’s MENU, tap FILE > FILE, or press FILE.
2.
Tap Others under Save, or press the soft key. The following screen appears.
Select
Others.
Starts saving
Set the file name. ► sec. 19.4
Set the save destination. ► sec. 19.4
Set the data
to save.
Saves a screen capture
► sec. 18.3
Saves snapshot waveforms
(in Scope mode)
Save automated
measurement values of
waveform parameters
Saves FFT analysis
results
Setting the Data Type to Save (Data Type)
Screen Image: Save the display to a PNG, BMP, or JPEG file.
Snap: You can save the waveform data captured in a snapshot. The extension is .SNP.
This is valid in Scope mode.
Measure: Save the results of automatic waveform parameter measurement to a file in CSV
format.
FFT: You can save FFT analysis results to a file in CSV format.
To Next Page
Loading...
