19-12
IM DL950-02EN
Selecting the Waveform Save Range (Range)
3.
Tap Range, or press the soft key.
When dual capture is on, tap Low Speed Save Range or High Speed Save Range, or press
the soft key. The following screen appears.
Scope Mode
Saves the data displayed in the main
window
Saves the range of data displayed in
the zoom window Zoom1
Saves the range of data displayed
in the zoom window Zoom2
Saves the data in the area between
the cursors
When Dual Capture Mode Is Off
When Dual Capture Mode Is On
Low-speed sampling
High-speed sampling
Saves the data displayed
in the main window
Saves the range of data
displayed in the zoom window
Recorder Mode
Saves the data of the entire measured waveforms
Saves the data displayed in the main window
Saves the range of data displayed in the zoom
window
Saves the data in the area between the
cursors
19.4 Saving Waveform Data
To Next Page
Loading...
