YOKOGAWA ScopeCorder DL950 User Manual

22-6
IM DL950-02EN
Connection
4.
On the main unit menu and all sub unit menus, tap Connect, or press the soft key. The main
unit and sub units will be connected. When the connection operation on some units is not
complete, the Connect menu on units that connection operation has been completed changes
to Cancel. When the connection operation on all units is complete, Cancel changes to
Disconnect.
Note
The connection operation must be performed on the main unit and all the sub units connected to the main
unit. The link feature will not work if the connection operation is not performed on any of the units.
Disconnection
5.
While connected, tap Disconnect, or press the soft key on the main unit menu or a sub unit
menu. The connection will be disconnected.
When the link is disconnected on a sub unit, the link feature between the main unit and all
connected sub units will be disabled.
6.
To reconnect, on the main unit menu and the sub unit menus, tap Connect, or press the soft
key.
22.2 Configuring the Multiple-Unit Connection

YOKOGAWA ScopeCorder DL950 Specifications

General

Brand	YOKOGAWA
Model	ScopeCorder DL950
Category	Test Equipment
Language	English