3-14
IM DL950-02EN
ACQUIRE Menu (when dual capture is on)
1.
On the waveform screen’s MENU, tap ACQUIRE > DUALCAPTURE, or press
SHIFT+ACQUIRE(DUAL CAPTURE). A dual capture menu appears.
You can also display the dual capture menu by tapping ACQUIRE > ACQUIRE on the
waveform screen’s MENU, or pressing ACQUIRE.
Turns SSD recording on or off
To perform SSD recording, set the
capture mode to On Start.
To perform SSD recording, set
action to OFF.
Configure SSD recording.
See “SSD Recording Detail Setup.”
The file name and file division settings when dual capture is off are valid.
Note
SSD recording can be performed only on the low-speed sampling waveform when dual capture is on.
Recorder Mode
ACQUIRE menu
1.
On the waveform screen’s MENU, tap ACQUIRE > ACQUIRE, or press ACQUIRE. The
ACQUIRE menu appears.
See “Basic Setup.”
See “Detail Setup.”
3.5 Performing Real-time Recording (SSD Recording) (/ST1 option)
To Next Page
Loading...
