P1086708-001 ZXP Series 9 Card Printer Service Manual 93
Operation
Operator Control Panel (OCP)
Wireless Settings Menu
Main Menu
Advanced Settings Menu
UP DOWN SELECT
RETURN WITHOUT SAVE
SETUP WIZARD
SET SUBNET MASK
Easily connect you printer to a wireless network. †
Enable or disable the radio.
Change the subnet mask.
SAVE SETTINGS
DHCP MODE
SET DEFAULT GATEWAY
SET DEFAULTS
Enable or disable the DHCP.
Change the gateway.
Return to the default wireless settings.
SET IP ADDRESS Change the IP address of the printer.
RADIO CONTROL
† See “Setup via OCP” on page 97 for additional information.
To Next Page
Loading...