Zebra ZXP 9 Series User Manual

138 ZXP Series 9 Card Printer Service Manual P1086708-001
Troubleshooting
CODE MESSAGE POSSIBLE CAUSE POSSIBLE SOLUTION
19005 WIFI ASSOCIATION FAILED • During association with an
access point, the association
failed.
• Poor signal quality.
• Low signal strength.
Put the printer antenna in
a similar orientation as the
access point’s antenna, and
re-run the set-up wizard to re-
establish the wireless settings.
19006 WIFI CONNECTION FAILED • They key handshake
following the association
failed.
• WEP Key or WPA
passphrase is incorrect.
Ensure that you have the
correct key/passphrase, then
re-run the set-up wizard to
establish new wireless settings.

Zebra ZXP 9 Series Specifications

General

Resolution	300 dpi
Card Capacity Output	100 cards
Memory	64 MB
Interface	USB, Ethernet
Operating Humidity	20% to 80% non-condensing
Print Technology	Dye Sublimation
Print Speed YMCK	Up to 190 cards/hour
Card Capacity Input	100 cards
Card Sizes	CR-80 ISO 7810
Connectivity	USB, Ethernet
Operating System	Windows, Linux
Options	Magnetic stripe encoding
Power Requirements	100-240V AC, 50/60Hz
Operating Temperature	15°C to 35°C
Card Thickness	10-40 mil