262 ZXP Series 9 Card Printer Service Manual P1086708-001
Replacement Procedures for the Printer
Procedures: InTM Takeup Assembly
Tests and Adjustments
This procedure requires the InTM Takeup Tool 105936-48 (also part of the ZXP9 Repair Kit 105936-
058). Contact Zebra Customer Service at +01 877-275-9327 for ordering information.
Starting at Step 11 and working the removal procedure in reverse through Step 5, complete the
procedure as follows:
Step 1. Set the replacement InTM takeup assembly in place; and secure, but do not tighten
(1/4 turn loose), the three mounting screws and associated washers.
Step 2. Set the InTM takeup tool in place, and ensure that the tool and the InTM takeup
bracket slide freely.
To Next Page
Loading...