Zebra ZXP 9 Series

P1086708-001 ZXP Series 9 Card Printer Service Manual 315
Replacement Procedures for the Printer
Procedures: Main PCBA
Replacement
Replacement is performed by reversing the removal steps.
Tests and Adjustments
Open the ZXP Toolbox
Step 1. Windows 7: Select Start > Devices and Printers, right click the Zebra ZXP Series 9
Card Printer, and select Printer properties from the pop-up menu.
Windows 8: Right-click the screen’s bottom-left corner (or press Windows+I) and
choose Control Panel from the pop-up menu, right click the Zebra ZXP Series 9 Card
Printer, and select Printer properties from the pop-up menu.
Windows 10: Select the Start menu and then select Settings > Devices, right click
the Zebra ZXP Series 9 Card Printer, and select Printer properties from the pop-up
menu.
Step 2. Select the Device Information tab and click on ZXP Toolbox.
Upgrade the Firmware
Step 3. Download the latest rmware. Go to www.zebra.com/zxp9-info.
Step 4. From the Toolbox, select the Printer Conguration tab. From the Firmware and
Settings menu, click Browse (circled below) and navigate to the location where the
rmware le is located.