442 ZXP Series 9 Card Printer Service Manual P1086708-001
Packing for Shipment
Packing for Shipment
Step 15. Place the two corner blocks on top of the right front and left front corners of the lower
foam insert.
Step 16. Place the upper foam insert onto the unit, and gently press it down so it makes a
snug t on the unit—the top of the upper foam insert should be even with the upper
edge of the carton.
Step 17. Roll up the power cord and USB cable and place them in the recess of the upper
foam insert.
Step 18. Close the shipping carton.
Step 19. Tape the shipping carton securely.
To Previous Page
Loading...